Soal Latihan MTCNA Maret 2017 81 %
- Which port does PPTP use by default?
- TCP 1723
- UDP 1723
- TCP 1721
- UDP 1721
2. What is possible with Netinstall?
- MikroTik RouterOS password reset with saving router's configuration
- MikroTik RouterOS configuration reset
- MikroTik RouterOS reinstall
3. Where should you upload new MikroTik RouterOS version packages for upgrading router?
- System Package menu
- System Backup menu
- Any directory in files
- FTP root directory or files directory of the router
4. One host on a internal network is accessing an external web page
through a MikroTik router that is doing source NAT, Select
correct statement about the packets that flow from that web page to
the host?
- Packets go through the output chain
- packets go through the input chain before the routing decision and after that through output chain
- packets go through the forward chain
- packets go through the input chain
5. How many DHCP server can be configured per interface on RouterOS?
- Unlimited
- Five
- Two
- One
6. If ARP = reply-omly is configured on an interface, this interface will
- add new MAC addresses in '/ip arp' list
- accept all IP addresses listed in '/ip arp' as static entries
- accept all MAC- addresses listed in '/ip arp' as static entires
- add new IP addresses in '/ip arp' list
- accept IP and MAC address combinations listed in '/ip arp' list
7. Mark all the features that can be used for limiting client registrations to your access point:
- registration-table
- access-list
- WDS
- wpa
8. It is required to make a web server on a privat LAN visible on
the Public Internet. Only the web server port should be
visible to the public. Which of the following configuration steps
must be met. (select all that apply)
- Public IP address of the web server must be installed the NAT Router
- Connection Tracking must be enabled on NAT router
- LAN address of the webserver should be routable on the internet
- route between the NAT Router and the webserver must exist
- in ip firewall NAT there should be a dst-nat between the public ip of therouter and the privat ip of the webserver
9. In RouterOS queue configurations the word "total" usually represents
- upload
- upload + download
- download + upload
- download
10. Which configuration menu should you use to change router's Winbox default port?
- /ip firewall service-ports
- /ip firewall filter
- /system resource
- /ip service
0 Comments